In my so slow progress towards my project, I've checked the following manufacturers for suitable drivers, and so far the result is meager. However, as I now again are considering drivers with foam surrounds, (I discarded a few such manufacturers earlier, and I cannot retriev them again) and I would like more to choose from, I now ask you to complement my list. I am interested in good, Hi-Fi drivers with low Fs and nothing else.
The list:
http://acoupower.com/
http://www.aespeakers.com/
http://www.audiotechnology.dk/iz.asp?id=4|a|132|||
http://www.aurasound.com/
http://www.bcspeakers.com/
http://profesional.beyma.com/ENGLISH/empresa.html
http://www.bmspro.info/
http://www.daytonaudio.com/loudspeaker/index.htm
http://www.eminence-speaker.com/
http://www.etongmbh.com/
http://www.fostex.com/index.php?file=home
http://www.gr-research.com/
http://www.hempacoustics.com/
http://www.p-audio.com/
http://www.jblpro.com/
http://www.mccauleysound.com/components.cfm
http://www.meniscusaudio.com/
http://www.monacor.de/int/en/startseite.html?spr=EN
http://www.morelhifi.com/index.html
http://www.phlaudio.com/
http://www.pioneerelectronics.com/pna/v3/pg/album/compare/0,,2076_310070073,00.html
http://www.precisiondevices.co.uk/
http://www.rcf.it/
http://www.rythmikaudio.com/
http://www.seas.no/default.htm
http://seismicsubs.com/index.html
http://www.soundsplinter.com/rls_supreme_series_LMT_12_inch_and_15_inch_diy_subwoofer_drivers.html
http://www.tcsounds.com/
http://www.tymphany.com/
http://www.visaton.com/en/index.html
The list:
http://acoupower.com/
http://www.aespeakers.com/
http://www.audiotechnology.dk/iz.asp?id=4|a|132|||
http://www.aurasound.com/
http://www.bcspeakers.com/
http://profesional.beyma.com/ENGLISH/empresa.html
http://www.bmspro.info/
http://www.daytonaudio.com/loudspeaker/index.htm
http://www.eminence-speaker.com/
http://www.etongmbh.com/
http://www.fostex.com/index.php?file=home
http://www.gr-research.com/
http://www.hempacoustics.com/
http://www.p-audio.com/
http://www.jblpro.com/
http://www.mccauleysound.com/components.cfm
http://www.meniscusaudio.com/
http://www.monacor.de/int/en/startseite.html?spr=EN
http://www.morelhifi.com/index.html
http://www.phlaudio.com/
http://www.pioneerelectronics.com/pna/v3/pg/album/compare/0,,2076_310070073,00.html
http://www.precisiondevices.co.uk/
http://www.rcf.it/
http://www.rythmikaudio.com/
http://www.seas.no/default.htm
http://seismicsubs.com/index.html
http://www.soundsplinter.com/rls_supreme_series_LMT_12_inch_and_15_inch_diy_subwoofer_drivers.html
http://www.tcsounds.com/
http://www.tymphany.com/
http://www.visaton.com/en/index.html
Hello buggsson
Great list, here are a couple others that might interest you.
http://www.mach5audio.com/product_info.php?products_id=56&osCsid=4c49bb738fcc14eb03fc850ffc876dfd
https://ssl.perfora.net/www.ficarau...68615bc3/shopdata/product_overview.shopscript
BTW what type of sub are you planning?
Great list, here are a couple others that might interest you.
http://www.mach5audio.com/product_info.php?products_id=56&osCsid=4c49bb738fcc14eb03fc850ffc876dfd
https://ssl.perfora.net/www.ficarau...68615bc3/shopdata/product_overview.shopscript
BTW what type of sub are you planning?
Thanks for the contribution TwisterZ.
Yes, the mach5 audio stuff look promising. I'll be waiting for their smaller sizes with great interest. 18" is way to large, even 15" is probably larger than what I will be able to negotiate as an acceptable size.
I am planning on making a two-box speaker set, with the first box on the floor beeing the sub section, and another box placed atop it, that will be a two-way of some sort. The sub is going to be an isobaric in push/pull mode, using either 2 or 4 woofers per box, simulation will tell, I hope. There is a suggestion for that in another thread by planet10.
Yes, the mach5 audio stuff look promising. I'll be waiting for their smaller sizes with great interest. 18" is way to large, even 15" is probably larger than what I will be able to negotiate as an acceptable size.
I am planning on making a two-box speaker set, with the first box on the floor beeing the sub section, and another box placed atop it, that will be a two-way of some sort. The sub is going to be an isobaric in push/pull mode, using either 2 or 4 woofers per box, simulation will tell, I hope. There is a suggestion for that in another thread by planet10.
Member
Joined 2004
- Status
- Not open for further replies.