Rockport style 2way speaker DIY project

[kimdh08]

My Rockport Style 2way Speaker DIY project..

I'm making Rockport style 2way speakers.
tweeter : scanspeak 9900
midwoofer : audiotechnology sk130 4ohm

First I designed passive network in test enclousure, freq. curve as follows

Passive tuning in test enclousure..

and making rockport style enclousure.

I plan to finish lacquer paint like rockport, wilson audio etc..

I used lacquer spray paint for car.

After first painting, too many scratches, so I used red putty..

Final enclousure painting as follows.

 

[LineSource]

Exceptional construction and finishing.

It's important not to obstruct the rear airflow from the midrange driver, hence proper chamfering rear baffle driver holes is needed.

 

[kimdh08]

Exceptional construction and finishing.

It's important not to obstruct the rear airflow from the midrange driver, hence proper chamfering rear baffle driver holes is needed.

Thank you for advising.
Fortunately front baffle is detachable, I will do chamfering later.

 

[kimdh08]

Finally finished...

Finally finished...

 

[pop4richard]

Great work looks really nice.

 

[ernperkins]

Absolutely gorgeous! Any more details (pics and/or links) on how you did the sloping bevels? They're definitely a step above the flat bevels one normally see.

 

[kimdh08]

I used epoxy resin on stepped front baffle..
Reference below image please.