crossover simulations

[DickHertz]

Since I don't have the means to do so, would it be possible for someone to cook up a crossover design for a Peerless 850122 woofer and an XT-25GT30-4 tweeter on a 9" x 18.5" baffle with 3/4" roundovers? The woofer would be mounted on the center line and the tweeter 6" down from the top and 6" from one edge. While not optimal, I'll have to rely on factory supplies parameters.

Peerless 850122 woofer:
https://www.parts-express.com/pedocs/specs/297-632-peerless-specifications-44346.pdf

Peerless XT25 tweeter:
https://www.parts-express.com/pedocs/specs/264-1016--tymphany-xt25tg30-04-spec-sheet.pdf

Thanks in advance for any help.

 

[PeteMcK]

without baffle step, 1.0mH in series with the woofer; attenuate the tweeter with 1.9 ohms (2x 3.9 in parallel), then 12uF in series and 0.8mH across the tweeter, tweeter connected reverse phase

 

[DickHertz]

Thanks Pete.