So while I wait for the goodies to arrive for the crossover, and work thru figuring out the L2 inductor value, I removed the front baffle and the speaker terminal for the cabinet to be duplicated.
Some pictures of the cabinet .
@planet10 Interesting to see that it's a birch ply over MDF and the back is MDF as well. Very well sealed, though you can see that the gasket wasn't secured well when the rear binding post/receptacle was installed originally.
(I'm also hoping that this thread puts some needed visibility and information on Tangent Acoustic since there's very little information out there on these speakers/company. )
Some pictures of the cabinet .
@planet10 Interesting to see that it's a birch ply over MDF and the back is MDF as well. Very well sealed, though you can see that the gasket wasn't secured well when the rear binding post/receptacle was installed originally.
(I'm also hoping that this thread puts some needed visibility and information on Tangent Acoustic since there's very little information out there on these speakers/company. )