This is just an area I can blab on about stuff without it using up bandwidth in the threads 
Hopefully someone will find it interesting or useful.
Tony.
Hopefully someone will find it interesting or useful. Tony.
I have two boxes now :)
Posted 30th August 2009 at 11:11 AM by wintermute
Updated 25th November 2009 at 12:22 PM by wintermute (categorized)
Updated 25th November 2009 at 12:22 PM by wintermute (categorized)
Glued the rear baffle onto the second of my MTM's today. Had an OH <insert your choice of expletive here> moment just after I placed the baffle onto the speaker. I'd put it on inside out! Now I realise that might sound a bit weird, but because my binding posts are not quite long enough for 25MM MDF I had to route out a few mm to allow me to put the first of two screws on. Anyway luckily I realised pretty quickly and was able to pull it off wipe off the glue, put some more glue down and get it screwed down and clamped without any problems. Would have been a bit of a disaster If I hadn't noticed straight away.
Was planning on putting in the new RCA's to the amp today as well, as a way of bypassing the preamp, but just didn't have the time or the energy. Maybe next weekend
Tony.
Was planning on putting in the new RCA's to the amp today as well, as a way of bypassing the preamp, but just didn't have the time or the energy. Maybe next weekend
Tony.
Total Comments 0
