• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

For Sale Biamp front ends similar to Diy FE 2022

Things you have for sale.
Member
Joined 2009
Paid Member
Hello,

I have for sale some nice and shiny stuff.

This time I have a few pairs of modules that can be used as a low thd line preamp or as an low thd amplifier front end, you know to drive a follower os.

These have balanced inputs, single ended outputs and a voltage gain of ~10x which can easily be changed on each side by replacing 2 smd resistors.
You can power them with up to +/-29vdc and they draw 30ma/entire module.

IMG_0816.jpeg


Each of the two big pcbs hosts 2 preamp channels.
These channels are connected in such a way that you can use them only for biamping so half pcb amplifies the lows and half the highs or whatever being same channel, for a stereo setup 2 pcbs will be needed.

Here is how the thd looks at 2.85vrms or close to 1w/8r
d554f8a8-ee5c-4e40-8d85-3802add3f1ec.jpeg


And here at close to 17vrms or close to 36w/8r
329e0610-e9d1-4da3-b510-b036ffa11d43.jpeg


Now probably you wonder what are those small pcbs, right?
Well the preamp produces a turn on thump and the small module is a relay that keeps the output shorted to gnd for a few seconds so it silences the thump.


The offer includes 2 preamp modules(4 channels) and 2 thump silencer modules.

Sold
 
Last edited: