Noted. I'll send you everything on monday morning as soon as I am back to my office as I do not have them on my home computer. Thanks for your patience and have a nice weekend!
Thank you Gianluca for the details!
Since there is no possibility to design a series of really matching products that include the 2U MiniDissipante as well as the Galaxy 2U ALU and end up with the same front panel height and width for all, I must now look for other solutions for my designs. It is very unfortunate indeed as the HiFi2000 chassis otherwise seem to be very good build quality and exterior finish.
Since there is no possibility to design a series of really matching products that include the 2U MiniDissipante as well as the Galaxy 2U ALU and end up with the same front panel height and width for all, I must now look for other solutions for my designs. It is very unfortunate indeed as the HiFi2000 chassis otherwise seem to be very good build quality and exterior finish.
Attachments
Here they are!
Do you have drawings of these panels should look like (holes, text..)? I can have a look at them and see how much it would cost to produce some of these but as I was telling you in my previous post they will be more expensive than standard panels because it's a customized job
Gianluca,
I have these drawings completed now. Where should I send them?
Regards,
Bjorn
I have 2 questions on the Disspante chassis
- Is the aluminum bottom panel vented and if so is it 4 or 6 row? Are drawings available? The downloads on your site don't seem to show the top or bottom panels. I'm specifically looking for the middle distance between the rows for the bottom panel.
- For the 300mm heatsink brackets, are the screw holes that mount the bracket to the heatsink 100mm part? The drawings are for the 400mm brackets and seem to show 100mm spacing. Wasn't sure if the 300mm brackets have the same spacing.
Hey Brian,
Here are the drawings you have requested 🙂 All the aluminium covers for the Dissipante chassis now have 6 row of holes and there is no difference between the top and bottom cover
Here are the drawings you have requested 🙂 All the aluminium covers for the Dissipante chassis now have 6 row of holes and there is no difference between the top and bottom cover
Hi Gianluca,
that self-supporting inner frame I see in the description of the Monoblock, on your website, is available separately?
The same question about the heathsink bracket I see in the DXF you just posted.
that self-supporting inner frame I see in the description of the Monoblock, on your website, is available separately?
The same question about the heathsink bracket I see in the DXF you just posted.
Yes, both the Dissipante brackets and the inner frame of the MonoBlock can be purchased separately if needed
Thanks for the info.
Have I to contact your sales office or are there any links on the website for shopping these parts?
Have I to contact your sales office or are there any links on the website for shopping these parts?
I know this is a bit late but I have 3D models of some of the cabinets I made from the dxf drawings. I use Solidworks but can save in a variety of format. I can also generate a 3D drawing which you can screen shot the different panels and draw and dimension features in PowerPoint. Let me know
