Insofar as the H2 give-away sign up thread has become tediously long,
I am posting the build documentation here.
I am also happy to say that for those of you that missed the group
effort, it appears that the diyAudio store will soon offer these at a
nice cheap price.
I am posting the build documentation here.
I am also happy to say that for those of you that missed the group
effort, it appears that the diyAudio store will soon offer these at a
nice cheap price.
Nelson, can you give us a quick rundown on the differences between the original build, Rev1 and now this new Rev2, thanks.
I'm interested in perhaps becoming a EU distributor of the DIY Audio store packages? PCB manufacturing is cheap, and with the parts I'll be ordering for the ones on the way I'll have stupid amounts of excess 😛
is there any interest in that?
is there any interest in that?
While searching through my two favourite resistor manufacturers (a taiwanese and a chinese brand) I could not find one value in 1/2w (which is just above 0.4) like specified in the Digikey Parts. I can't imagine most of these resistors will be dissipating that much, so is quarter watt fine too?
this is really not address for asking that
find a way to contact Jason, he is DiyAudio Honcho
most project around are same in fact that majority of resistors are 0207 size
that's enough of info (99% of 0207 having same power, even if some factories are declaring 400mW, some 600mW), and if you want to go bellow that in size, you need to take care of specific position in circuit and dissipation
You might want to use the law of good old Ohm. If you know the current through the resistor or the voltage over it, you are able to calculate the power dissipation. U=R*I and P=U*I, P being the power. So a 221 Ohm resistor with e.g. 10mA will give you…? You have to substitute. P=R*I^2. Then you might want to derate it, give some margin.
