Hello,
I want to build a diy projector with a 15,6" tft and an uhp lamp.
Unfortunately it is not possible to get an 250w uhp in germany so easy.
Where can i buy an uhp lamp kit with bulb and ballast like the one on the first page?
Thank you.
I want to build a diy projector with a 15,6" tft and an uhp lamp.
Unfortunately it is not possible to get an 250w uhp in germany so easy.
Where can i buy an uhp lamp kit with bulb and ballast like the one on the first page?
Thank you.
Hi 24Do01Ro09 !
I have the 250w UHP lamp and the ballast, but for DIY projector, the UHP lamp is not so good, not so brighter as HQI, not so longer life as HQI.
the 400W HQI lamp is best lamp.
I have the 250w UHP lamp and the ballast, but for DIY projector, the UHP lamp is not so good, not so brighter as HQI, not so longer life as HQI.
the 400W HQI lamp is best lamp.
LP-725/735 5.9 850 800*600 HS150AR15-1 79X79 P13SM019
LP-720/730 5.9 700 800*600 MSCR150E4H 75X75 P13SM019
that is, these burners are compatible ?
LP-720/730 5.9 700 800*600 MSCR150E4H 75X75 P13SM019
that is, these burners are compatible ?
Hi YWH, i was wondering, have you got more lamps in? hope that you may have more instock as i had been looking for one a while back and now in need of a bulb replacement as soon as i can get a hold of one...thanks for your help.
Benq MP611c projector shuts down, do I need a new lamp?
Hi, this seems to be a place where people know about projectors. I studied electronics but I'm new to projectors, and I'm trying to get one working.
The model is: Benq MP611c
It starts to power up, an image appears for about 10 seconds, and then the bulb switches off. The case fans keep running. There is still power going to the lamp ballast.
The power LED starts flashing orange, sometimes the lamp LED also comes on red. The case fans run for a while, and then sometimes it restarts and does this again.
The lamp fan/blower does not usually come on in this short timescale, but sometimes it starts. Shouldn't it be running all the time?
What is the likelihood that it needs a new lamp, versus a problem with the PSU or ballast?
Thanks for any advice you can give! 😱)
Hi, this seems to be a place where people know about projectors. I studied electronics but I'm new to projectors, and I'm trying to get one working.
The model is: Benq MP611c
It starts to power up, an image appears for about 10 seconds, and then the bulb switches off. The case fans keep running. There is still power going to the lamp ballast.
The power LED starts flashing orange, sometimes the lamp LED also comes on red. The case fans run for a while, and then sometimes it restarts and does this again.
The lamp fan/blower does not usually come on in this short timescale, but sometimes it starts. Shouldn't it be running all the time?
What is the likelihood that it needs a new lamp, versus a problem with the PSU or ballast?
Thanks for any advice you can give! 😱)
NEC Multisync vt540
does anyone know how to reset the lamp after replacement? I read somewhere I should hold down the "help" button for 10 secs but nothing happened.
does anyone know how to reset the lamp after replacement? I read somewhere I should hold down the "help" button for 10 secs but nothing happened.
@ywh - Thanks, it was the bulb.
I bought a working projector of the same model so I could diagnose by swapping parts (cheaper than a lamp, or an ESR meter).
What are the options for replacing a lamp cheaply?
Do you sell the original internal lamp and the high-temperature cement?
Cheers
I bought a working projector of the same model so I could diagnose by swapping parts (cheaper than a lamp, or an ESR meter).
What are the options for replacing a lamp cheaply?
Do you sell the original internal lamp and the high-temperature cement?
Cheers
Hi alexbird !
please show me your reflector, take some pictures.
I can rebuild a lamp if I have this tpye reflector, I can send to you to run, if it can not work you can send it to me and lost shipping only. OK?
please show me your reflector, take some pictures.
I can rebuild a lamp if I have this tpye reflector, I can send to you to run, if it can not work you can send it to me and lost shipping only. OK?
Hi ywh,
Here are some pictures of the reflector and lamp. Let me know if you need to see anything else.
Cheers,
Alex
Here are some pictures of the reflector and lamp. Let me know if you need to see anything else.
Cheers,
Alex
merry Christmas !
Hi Alex, sorry later.
I have the burner , but no price is $70, shipping is $5, cost of paypal is $4, total is $79
Hi Alex, sorry later.
I have the burner , but no price is $70, shipping is $5, cost of paypal is $4, total is $79
hi ywh,
do you have the 160w BSM DC burner for LT170 LP
pls provide the price and shipment cost to India (delhi)
do you have the 160w BSM DC burner for LT170 LP
pls provide the price and shipment cost to India (delhi)
- Status
- Not open for further replies.
- Home
- General Interest
- Everything Else
- The Moving Image
- DIY Projectors
- I got my new lamp. It is for commercial projection use. people use it to replace the