Ian TPS7A4700 Regulators - 3 units

[korben69]

Hi

I've no use of those regs based on Ti TPS7A4700, designed by Iancanada.

- 3 Regulators Soldered & Tested : 3.3V - 5.0V - To be set with 0R SMD
- SMD 0R resistors to adjust output voltage

Parts used :
C1/2/3/4/5/8/12 : Murata MLCC X7R 10uF/25V - Mouser GRM31CR71E106KA12L
C6/7 : Kemet Tantal 100uF/16V - Mouser 80-T495D107M16E100
C9 : Panasonic SEPC 33uF/20V - Mouser 667-20SEP33M
C10 : Murata MLCC 1uF/25V X7R - Mouser 81-GRM21BR71E105KA99
C11 : Wima MKS2 0.47uF/63V - Mouser 505-MKS2.47/63/10
R1 to R8 : 0R - Mouser 660-RK73Z1JTTD
R9 : 1K - Mouser 660-RK73H1JTTD1001F
Led : Osram Green 10mcd 20mA - Mouser 720-LGQ971-KN-1
IC : Ti TPS7A4700 - Mouser 595-TPS7A4700RGWT

PM for details, worldwide shipping tracking included.

Regards,
Phil

 

[Stixx]

Phil,
how much for one, i.e. 3.3V?
Or do you sell only all of them together?

 

[korben69]

Hi Oliver
I'd like to sell all of them in one shot 😉
Output voltage is really easy using 0R resistors.
Shipping is low due to small size.
Let say 20€ / unit, 50€ for the 3 units.

Regards,
Phil

 

[korben69]

Will consider separate sell.
Please specify your prefered VOut 😉
Traked shipping included
PM for details

Regards,
Phil

 

[Stixx]

Sorry Korben69 for the late reply.
Reserve the 3.3V for me, PLEASE 😉

 

[Ardahan]

Hello,
Looking in the first picture third regulator (to be set one), is cap C9 reverse?

Best regards,
Arda

 

[korben69]

Hello,
Looking in the first picture third regulator (to be set one), is cap C9 reverse?

Best regards,
Arda

Correct Arda, fixed 😉
Regards
Phil

 

[korben69]

Regulators are sold.
Thanks for looking.

Regards,
Phil