I have the cabinet plans for the Impulse H6 speakers. Impulse is no longer on the marked, but they made some fantastic hornconstrutions. I'm now planning to build the H6. The problem is to find a replament driver. The original driver is SEAS CA17RCY, this driver is no longer possible to get, as far as I know.
I wonder, will SEAS CB17RCY/P be a good replacement.
Thank you
Håvard
I wonder, will SEAS CB17RCY/P be a good replacement.
Thank you
Håvard
Hi Håvard!
We built the H6 with the Vifa C17WG69-08. It works very well!🙂
Have you got any info about the H2???
Greets:
Tyimo
We built the H6 with the Vifa C17WG69-08. It works very well!🙂
Have you got any info about the H2???
Greets:
Tyimo
Thanks a lot for the info.
Have not get any information about the H2.
Planning to do some cabinetwork this summer. Have had a pair of speakers with the Seas CB17 unit, and this is a very fine loudspeaker.
Håvard
Have not get any information about the H2.
Planning to do some cabinetwork this summer. Have had a pair of speakers with the Seas CB17 unit, and this is a very fine loudspeaker.
Håvard
I measured my old pair ( - with all the errors that risks!) for Håvard who asked for confirmation of a principle.
I will not be posting the sketch generally because the design (however simple) is not my property.
I will not be posting the sketch generally because the design (however simple) is not my property.
martin clark said:I measured my old pair ( - with all the errors that risks!) for Håvard who asked for confirmation of a principle.
I will not be posting the sketch generally because the design (however simple) is not my property.
Martin
Do you have any opinion about the Seas CB17RCY/P driver?
Håvard
question to Martin
Hi Martin!
Nice to see you here!🙂
I sended you some e-mails about the H2 subject, but you didn't unswered yet. Did I hurt you with something??
Greets:
Tyimo
P.S.: I have the "Omni" H6........ 😀
Hi Martin!
Nice to see you here!🙂
I sended you some e-mails about the H2 subject, but you didn't unswered yet. Did I hurt you with something??
Greets:
Tyimo
P.S.: I have the "Omni" H6........ 😀
Not at all Tyimo, I just haven't had any time to do the necessary; my apologies.
I'll email you soon 🙂
I'll email you soon 🙂
Dear Moderator!
Please move this thread to the Loudspeaker site, because the Impulse speakers are not full range!
Thanks!
Tyimo
Please move this thread to the Loudspeaker site, because the Impulse speakers are not full range!
Thanks!
Tyimo
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Full Range
- Impulse H6 replacement driver