A pair of brand-new, solid-built chassis for tube power amps with TAMURA transformers
Size: W370 X D270 X H71 (mm, each)
Top plate: Stainless steel, mirror finish, very beautifully engineered
Frame and Bottom plate: Steel; Grey hammer tone
Pre-Drilled holes:
Power transformer: TAMURA 3000 series (e.g. PC3011)
Output transformer: TAMURA F2010 series (e.g. F2011, F2012)
Choke transformer (x2): TAMURA 4000 series and 300 series (e.g. A4003, A4004). Also compatible with TAMURA Driver transformer of B5000 series
Tube socket holes: 30mm (x2, for power tubes such as EL34, 6L6, KT88, EL156, etc.); MT9P socket (x3)
Other holes for power socket, RCA and Speaker connectors, power switch, power indicator, etc.
Manufacturer: Sanei Radio Inc., Japan
Ask for $350 + S/H
Note: I will list TAMURA transformers in another post. I am down-sizing while we are approaching retirement age.
Size: W370 X D270 X H71 (mm, each)
Top plate: Stainless steel, mirror finish, very beautifully engineered
Frame and Bottom plate: Steel; Grey hammer tone
Pre-Drilled holes:
Power transformer: TAMURA 3000 series (e.g. PC3011)
Output transformer: TAMURA F2010 series (e.g. F2011, F2012)
Choke transformer (x2): TAMURA 4000 series and 300 series (e.g. A4003, A4004). Also compatible with TAMURA Driver transformer of B5000 series
Tube socket holes: 30mm (x2, for power tubes such as EL34, 6L6, KT88, EL156, etc.); MT9P socket (x3)
Other holes for power socket, RCA and Speaker connectors, power switch, power indicator, etc.
Manufacturer: Sanei Radio Inc., Japan
Ask for $350 + S/H
Note: I will list TAMURA transformers in another post. I am down-sizing while we are approaching retirement age.
