On sale 2 populated PCB to build Andrea Ciuffoli's Power Follower amplifier: the Power Follower
In this kit are included:
2 populated PCB
2 bridge rectifiers
2 filtering capacitors (Nichicon KG gold tune)
2 paper and oil caps (input signal)
2 Aerovox ALS30A caps (output signal) with holding rings
cables
On the PCBs I used Elna Silmic II and Nichicon super through caps, Dale RN and CPF resistors, not inductive bias resistor.
To complete the Power Follower, you need a power transformer and heathsinks (not included in this selling).
Price: I am thinking that 120 euro is fair.
In this kit are included:
2 populated PCB
2 bridge rectifiers
2 filtering capacitors (Nichicon KG gold tune)
2 paper and oil caps (input signal)
2 Aerovox ALS30A caps (output signal) with holding rings
cables
On the PCBs I used Elna Silmic II and Nichicon super through caps, Dale RN and CPF resistors, not inductive bias resistor.
To complete the Power Follower, you need a power transformer and heathsinks (not included in this selling).
Price: I am thinking that 120 euro is fair.
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.