Proac Super Tablette Xover

[fred0823]

Hi, I am new here. Recently a friend of mine bring his Proac Super Tablette to share this great little speaker. It was purchased some 30 years ago. So I took the chance to open it up for a look of what's inside.

Here is the Xover circuit in case someone want to play with it. I did the measurement for all 3 inductors and their DCR values are also included in the circuit.

https://farm8.staticflickr.com/7849/47239217361_3742d7eec2_b.jpg

R3,R4,R5 are DCR for the 3 inductors. Please do pay attention to L3 which has a 6R7 DCR. If you are trying to replace L3 the DCR has to take into consideration. 6.7ohm has a huge impact for the midbass around 1K~3kHz

happy DIY !

 

[Rodango]

Would any modification to this crossover be required when pulling the original SCAN-SPEAK 2008s and replacing them with a Hyquophon OW1s?

Thanks!

 

[Inductor]

Do you need to? They are very similar.

 

[fred0823]

I had some DIYs using the OW1, you can use it to replace the D2010 tweeter with no modification on the original xover. OW1 has more extension above 20Khz. When comparing with D2010, the OW1 does give more clarity and details.