Does anyone know what the value of the gain pod for the fosgate 600.4?The board placement is RV300-A & RV300-B. Both of the gain potentiometers are bad horrible static when adjusting. I think the value is 5K but I want to make sure. The schematic does not show a value either. Any Help would be appreciated. Here is a picture.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
They are way to much play in them to be fix with contact cleaner🙁
I fixed the missing picture the number's on the side of the pod is (385K Ohms X2)
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
3B is the resistance taper. 5k is the value of each pot. There are two pots.
Rockford used to sell parts. I don't know if they still do. If not, Mouser probably has something that will work.
I've had to replace less than 5 of these pots in the many hundreds of amps that I've repaired that used these pots. All others cleaned up with contact cleaner.
Rockford used to sell parts. I don't know if they still do. If not, Mouser probably has something that will work.
I've had to replace less than 5 of these pots in the many hundreds of amps that I've repaired that used these pots. All others cleaned up with contact cleaner.
Thanks Perry. I was looking at mouser site last night this is what I found
Click Link> PTD902 Bourns 5 kOhms Potentiometers | Mouser
- Status
- Not open for further replies.