Is the DSC3 much better than the DSC2 in sound?
Where can I buy a DSC3 or find someone to build one?
Where can I buy a DSC3 or find someone to build one?
Dear all, I try to find the BOM of the Amanero DSDit with mouser data, did you have it ? because with the eBom that I download there is no component caractéristique. Thanks for your help. The goal is to do DSD'it on Amanero Combo384 + DSC3 .
Thanks thuanth43, It should be usefull too to share the « mouser « bom for the diy community.
HI All,
I have built a few boards now and updated the assembly guide to add what I have found. I hope it will be useful to someone.
I have built a few boards now and updated the assembly guide to add what I have found. I hope it will be useful to someone.
Since I am using Amanero, the second power feed is not used (for BBB).
The trace is cut (ground is on dirty side) to feed an off board 5V regulator to the onboard 3.3v regulators for the clocks separately,
Ferrite bead is not used, just 5V directly to LP5907.
This is an easy and very positive upgrade.
By the way, the bypass capacitors are all upgraded to Rubycon MU.
The trace is cut (ground is on dirty side) to feed an off board 5V regulator to the onboard 3.3v regulators for the clocks separately,
Ferrite bead is not used, just 5V directly to LP5907.
This is an easy and very positive upgrade.
By the way, the bypass capacitors are all upgraded to Rubycon MU.
Last edited:
Made one with Bisesik's 1:16 Ag:Ag transformer + buffer, primary loaded with 22R AN silver Tantalum.
You should hqplayer letting remodulating the DSD source, sounds better. More often then not, DSD source modulation is not all that good. In addition, source material, if good quality without too much compression, almost always is at -10dB or less at average. Exactly there where the DAC performs optimal.
For some reason I see people sticking with Amanero and Beaglebone.
After more evaluation, I come to the same conclusion that Pavel Pogodin already came to when he discovered the Xing U30. It just sounds much better then these original options. Everyone that I know who switches from Amanero to Xing U30 is saying "should have done this much earlier". If you read the documentation that Pavel provides for the DSD'it on puredsd.ru then you can also see clear indication how to modify the Xing U30 for this purpose.
After more evaluation, I come to the same conclusion that Pavel Pogodin already came to when he discovered the Xing U30. It just sounds much better then these original options. Everyone that I know who switches from Amanero to Xing U30 is saying "should have done this much earlier". If you read the documentation that Pavel provides for the DSD'it on puredsd.ru then you can also see clear indication how to modify the Xing U30 for this purpose.