Fane Studio "CX 12 PA" (CX12 PA - CX12) Looking for Replacement or Voice Coil Repair

[tiefbassuebertr]

Back to the actually topic - the owner of this coax driver will wait for finding a company, who can carry out the recone procedure on a routine basis - i.e. who has already done this several times - like this company under
https://greatplainsaudio.com/services/
for Altec Lansing.

I came across this page while looking for information about another driver:
https://speakerrepairshop.nl/en/bilder/c-23
info@goodhifi.com
I'll ask there next days.
This FANE model is close to those from attached files - so I think-

P.S.: who know companies in European Union like those from United States under
https://greatplainsaudio.com/services/

 

[tiefbassuebertr]

Unfortunately the reply from speakerrepairshop.nl was follow:
Good morning,
I am sorry, we don’t do any repairs ourselves anymore, it’s too busy.
Met vriendelijke groet / kind regards, Myrko Schneider & Maroesjka Bakker Good Hifi V.O.F.
Tel: 06-40381232 / +31640381232 (Monday-Friday from 10.00-16.00 [GMT+1]), e-mail prefered.

 

[mdpaudio]

Do they still have the parts you can buy?

 

[JMFahey]

That, if at all possible.

If not, an experienced repair guy can remove the whole "soft" assembly: cone voice coil spider, measure voice coil dimensions: exact diameter (no tolerance there), winding length, former length, and hunt for a replacement.

IF available, he may remove old voice coil with a Dremel (grinding it from the inside) until it disappears, leaving cone and spider with a proper sized hole.
A few 100ths of a mm larger than VC former, so it can slide in.

He can rebuild the speaker with that and the new coil.