I have some questions for materials.
1) Clear gloss means Modpodge gloss?
2) Can I use urethane paint for alminium dust cap?
I couldn't find high solids paint .
IME, yes, since preserving as much efficiency as practical is the ideal goal and based solely on the published response plot, toe them in 15-30 degs or more so that they cross at some point in front of your face [usually about the width of it] where they sound most tonally balanced over the widest BW and if the extreme HF is missing, then either boost 16 kHz-up or add a true super tweeter [typically a piezo element] capped off ~ [4 - 6] octaves higher to 'taste'.
This is the kind of paint you want.
Testors Enamel Paint 1107 Turquoise
Google is not finding me Japanese sources. You are looking for a hobby shop that sells plastic models.
Gloss: Model Master Acryl Clear Flat, 1 oz.
This should be at the same model store.
ModPodge should be findable at a general craft store. Also the ZIG, but finding the exact brand could be tricky. It “dries” if left inthe air, put it between 2 pieces of paper and it is like stickies.
Here is a set of A1/A2/A3/A4/A5 nibs: Speedball Calligraphy Nibs | The Paint Spot - Art Supplies and Art Classes, Edmonton
And a 56: https://www.amazon.com/Speedball-School-Pen-Fine-Pack/dp/B000BYT4DY
dave
Testors Enamel Paint 1107 Turquoise
Google is not finding me Japanese sources. You are looking for a hobby shop that sells plastic models.
Gloss: Model Master Acryl Clear Flat, 1 oz.
This should be at the same model store.
ModPodge should be findable at a general craft store. Also the ZIG, but finding the exact brand could be tricky. It “dries” if left inthe air, put it between 2 pieces of paper and it is like stickies.
Here is a set of A1/A2/A3/A4/A5 nibs: Speedball Calligraphy Nibs | The Paint Spot - Art Supplies and Art Classes, Edmonton
And a 56: https://www.amazon.com/Speedball-School-Pen-Fine-Pack/dp/B000BYT4DY
dave
Wow FF85wk is amazing driver.
So smooth than I thought from reviews in my environment.
Feel like why I didn't have this until now???
I also bought solid core cable made by Audio-technica.
Solid core cable is best for me.
Thank you Dave,uFonken box plan is the art.
So smooth than I thought from reviews in my environment.
Feel like why I didn't have this until now???
I also bought solid core cable made by Audio-technica.
Solid core cable is best for me.
Thank you Dave,uFonken box plan is the art.
Attachments
Last edited:
Can we assume both methods can give the same result, and if they do, does one have an advantage over the other?
Are you saying they should be used together or did you mean they're equivalent?
Hello Dave.
I am thinking to enable SB65wbac25-4.
https://www.diyaudio.com/community/threads/sb-acoustics-sb65wbac25-4-what-to-do.273211/post-6996484
Do you think it's good to enable like this?
I am thinking to enable SB65wbac25-4.
https://www.diyaudio.com/community/threads/sb-acoustics-sb65wbac25-4-what-to-do.273211/post-6996484
Do you think it's good to enable like this?
Attachments
I’d have to do a tap test to tell.
I have gathered the most important posts for those that want to try EnABLing here: https://www.diyaudio.com/community/threads/how-to-enabl.385334/#post-6999171
dave
I have gathered the most important posts for those that want to try EnABLing here: https://www.diyaudio.com/community/threads/how-to-enabl.385334/#post-6999171
dave