Jkuetemann posted his Gerber files here. http://www.diyaudio.com/forums/group-buys/257057-slewmaster-project-boards-28.html#post4173413 . He may have some input boards still available. I have Gerber files for the Kypton-C boards. If you want them PM me your email address.
https://anistardi.wordpress.com/2014/12/31/symmetrical-ltp-vas/
Bass slightly better than my Blameless 150 but in high frequency Blameless 150 is better.
There is no DC voltage at turn on and turn off.
Bass slightly better than my Blameless 150 but in high frequency Blameless 150 is better.
There is no DC voltage at turn on and turn off.
Attachments
OK. Just pay attention of high frequency quality (lowered THD at high frequency). 0,01% THD20 at simulation is not enough or my implementation was bad.
bimo
That VAS looks like a cherry on top of the nice cake. Good job.
Maybe you can try to stick some CFA at the front of it (diamond input ??)
regards
Peter
That VAS looks like a cherry on top of the nice cake. Good job.
Maybe you can try to stick some CFA at the front of it (diamond input ??)
regards
Peter
Hi vud,
That looks very nice. Do you find it runs cool enough like that? I see good ventilation on the top panel but the bottom panel looks solid.
That looks very nice. Do you find it runs cool enough like that? I see good ventilation on the top panel but the bottom panel looks solid.
guys these are my esp p101 mono blocks i use now . chassis i built with 1/4 x 5 aluminum welded in the corners. face is 3/8 aluminum with bottom and top in open mess 1/8 holes giving all the cooling they need. plitron toridal 240va and 6x 6800 uf caps.
don't get me wrong but these are great amps in there own right but after i saw jwilhelm post of his slewmaster build i'm now on the hunt for a no holds bared diy amp i can build
[URL=http://s400.photobucket.com/user/91owner/media/power%20amp%20build/attic%20listening%20room%205.jpg.html]
don't get me wrong but these are great amps in there own right but after i saw jwilhelm post of his slewmaster build i'm now on the hunt for a no holds bared diy amp i can build
[URL=http://s400.photobucket.com/user/91owner/media/power%20amp%20build/attic%20listening%20room%205.jpg.html]
An externally hosted image should be here but it was not working when we last tested it.
[/URL]
OS is Ostripper.http://www.diyaudio.com/forums/soli...ur-solid-state-pics-here-395.html#post4233768. He designed these monsters.
sorry i got ya now
still4given and i are just working out details. he asked me what ips board?
this is the input right. i don't enough to tell him. any thoughts on this?
awesome brother cfa it is for now. at least i know what to tell him now.
one more thing where can i find a build list of components or can ostripper help with this?
thanks
gordie
one more thing where can i find a build list of components or can ostripper help with this?
thanks
gordie
http://www.diyaudio.com/forums/solid-state/248105-slewmaster-cfa-vs-vfa-rumble.html I think they are working on some assembly manuals but up until now we've been building from schematics.
ok i looked at that and didn't know at that time what cfa vs vfa was.
i'm scared now
i'm not a avid builder just a novice. a 52 year old hard core lover of all things audio.
i'm all in at this point. i will have a pair of these at 500w come hell or high water.
see i just built the p101 with no issue but these had step by step instruction.
p101 board has r1 r2 r3 and c1 c2 c3 and so on will the slew boards have labeling?
i'm scared now
i'm not a avid builder just a novice. a 52 year old hard core lover of all things audio.
i'm all in at this point. i will have a pair of these at 500w come hell or high water.
see i just built the p101 with no issue but these had step by step instruction.
p101 board has r1 r2 r3 and c1 c2 c3 and so on will the slew boards have labeling?